KL4404 | Bus Terminal, 4-channel analog output, voltage, 0…10 V, 12 bit, single-ended

KL4404 | Bus Terminal, 4-channel analog output, voltage, 0…10 V, 12 bit, single-ended

The KL4404 analog output terminal generates signals in the range between 0 to 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. In the KL4404 Bus Terminal, the four outputs are 2-wire versions.

The Bus Terminal has a common ground potential. The power contacts are connected through. The reference ground of the outputs is the 0 V power contact. The LEDs indicate the data exchange with the Bus Coupler.

Technology single-ended

Number of outputs 4

Signal voltage 0…10 V

Load > 5 kΩ (short-circuit proof)

Output error < ±0.1 % (relative to end value)

Resolution 12 bit

Conversion time ~ 4 ms

Electrical isolation 500 V (K-bus/signal voltage)

Current consumption power contacts load only

Current consumption K-bus typ. 20 mA

Bit width in the process image output: 4 x 16 bit data (4 x 8 bit control/status optional)

Configuration no address or configuration setting

Weight approx. 75 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings CE, UL, ATEX, IECEx, DNV GL

Ex marking ATEX:

II 3 G Ex nA IIC T4 Gc

IECEx:

Ex ec IIC T4 Gc

>>> Refer to technical document: kl440x_kl443xen