Amplifier block, KEYENCE GT2-100N large display amplifier

Contact

Product information:
Product code: GT2-100N
Installation type: Panel mount/Screw mount using optional mounting bracket
Output type: NPN output
Power Consumption:
Normal: 4,500 mW maximum (30 V, 150 mA peak)
Power saving (Eco): Maximum 3,600 mW (30 V, 120 mA maximum)
Power source display:
Measured value display: 6 + 1/2-digit 7-segment LED (red)
Other displays: 13-level 2-color LED bar display (red, green), indicator light (red, green)
Display range: -199.9999 to 199.9999
Screen resolution: 0.1 μm
Control input:
Timer/preset/capacitor input
Input time Timer input: Minimum 2 ms
Preset/preset/capacitor input: Minimum 20 ms
Control output:
HH / High / Go / Low / LL
NPN open collector, no output voltage
Applicable current: 50 mA
Maximum applicable voltage: 40 V
Residual voltage when ON: 1 V max
Normally Open/Normally Closed Selector Switch (Applicable current drops to 20 mA or less when 2 or more sensor leads are connected to the GT2-100 Series.)
Response time:
hsp(3)/5/10/100/500/1000 ms
(When using GT2-Pxxx, hsp (12)/20/40/400/2000/4000 ms)
Environmental resistance:
Ambient temperature: -10 to +50 °C
Ambient humidity: 35 to 85 % RH (Non-condensing)
Vibration resistance: 10 to 55 Hz, 0.15 mm Dual amplitude in X, Y, Z directions respectively, 2 hours
Material:
Main body shell: Polycarbonate
Key tip: Polyacetal
Front panel: PET
Cable: PVC (GT2-75N/75P/76N/76P only)
Power Supply / I/O Cables:
Power supply: Terminal block
I/O: 20-pin connector (standard MIL)
Weight: Approx. 380 g