C9900-Ex1x | Push-button extension for CP6xxx and CP7xxx Control Panels and Panel PCs with 12-inch display and alphanumeric keyboard (service phase)

C9900-Ex1x | Push-button extension for CP6xxx and CP7xxx Control Panels and Panel PCs with 12-inch display and alphanumeric keyboard (service phase)

Control Panels and Panel PCs with push-button extension enable the application-specific arrangement of electromechanical buttons, switches, signal lamps, additional membrane keys and a hand wheel directly on the operating unit. It enables precise adaptation of the Control Panel to the machine control requirements. In many cases, a machine operator control panel is no longer required, since all functions are integrated in the Control Panel. The Control Panel housing is increased in size on one side. Depending on the required functions and the electromechanical components, the flat rear panel is enlarged or extended with a trough-shaped rear panel for the button area.

For the CP77xx and CP79xx units the Rolec Tara Plus mounting arm system, article numbers 149.025.012, 149.025.013, 149.025.014, 149.035.012, 149.035.013 or 149.035.015, can be mounted centrally at the rear of the Control Panel. The mounting arm can optionally be connected from above or below. The Rittal mounting arm system is available as an additional option. The CP6508.020 or CP6501.170 Rittal adapters can be mounted at the back of the Control Panel. The cables are routed through the mounting arm, through a cable gland in the mounting arm adapter and from there concealed through a channel at the rear of the Control Panel to the push-button extension. A circular plug-in connector instead of a screwed cable gland is available on request. The housings of the CP7xxx range have IP65 protection rating on all sides. The wiring space can be opened without removing the Control Panel from the mounting arm.

The buttons, switches and indicator lamps are connected to the control system via USB. A second contact on the buttons and switches can at the same time be wired directly via a terminal row. Numerous other variants are conceivable, which can be individually designed in accordance with requirements.

C9900-Ex1x Push-button extension for built-in Control Panel, Economy built-in Control Panel and Economy built-in Panel PCs

Features        push-button extension for CP6x31-00xx and CP7x31-00xx

push-button extension on the right side

16 push-button keys with signal lamp, type Siemens Signum square, 30 x 30 mm

1 emergency stop key Siemens Signum, directly wireable

Labels for push-button caps allow individual marking.

All push-buttons are transmitted via CP-Link or USB with one normally-open contact.

Additionally, all push-buttons are directly wireable with a second normally-open contact via a terminal row.

All signal lamps are transmitted via CP-Link or USB only.

>>> Refer to technical document: CP7931-0000-0000-E718