Controller, PNP type Ultra-high-speed laser displacement detection sensor KEYENCE LK-G5001P

Product information:
Controller, PNP type Ultra-high-speed laser displacement detection sensor KEYENCE LK-G5001P
Type: Separate type, Main controller
Compatible with: May be compatible
Number of connected sensor heads: 2
Display:
• Minimum display unit: 0.001 µm
• Display range: ±999,999 µm to ±9,999,99 mm (7 settings)
• Display cycle: Approx. 10 times/s
LED indicator: LASER ON
Terminal block:
• Analog voltage output: ±10 V output, Output impedance: 100 Ω
• Analog output current: 4 to 20 mA, maximum load impedance: 350 Ω
• Number of Analog outputs: 2
Input:
• TIMING 1: Input voltage
• RESET 1
• Auto-zero 1
• Laser control: Input voltage
Way out:
• Indicator light: PNP open collector
• Generic comparator
Display:
• RS-232C: Baud rate 9600 to 115200 bps, Stop bit length 8 bits, Parity 1 bit
• USB: USB 2.0 suitable for high speed
• Ethernet: 100Base-TX/10Base-T
• EtherNet/IP®: Cyclic communication, Message communication, Number of connections 32, Compatible with CT14 version compatibility testing
PLC-Link: Supports a wide range of PLCs, including Mitsubishi Electric: MELSEC iQ-R, iQ-F, Q, L, FX series; combined with EtherNet/IP, CC-Link, and DeviceNet
Expansion block connector:
• Wide head: Up to 10 head extension units can be connected to one main controller
• Expansion block head: CC-Link block (LK-CC100) and DeviceNet® block (LK-DN100) can both be connected
Power supply:
• Power supply voltage: 24 VDC ±10%
• Maximum current consumption: 0.6 A for 1 head, 3.5 A for 12 heads
Environmental resistance:
• Ambient temperature: 0 to +50 °C when connecting 1 expansion unit, 0 to +40 °C when connecting 2 expansion units
• Ambient humidity: 35 to 85 % RH (No condensation)
Weight: Approx. 600 g