EL2535-0002 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 2 A, current-controlled

The EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated from the E-bus. The current values (0 to maximum output current) are specified by the automation device through a 16-bit value. The output stages are protected against overload and short circuit. Each EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

Special features:

• 2 PWM outputs with push-pull output stage
• Suitable for inductive loads > 1 mH
• ±2 A max. output current per channel at 24 V DC rated voltage

Connection technology: PWM output, push-pull outputs

Number of outputs: 2

Nominal voltage: 24 V DC (-15 %/+20 %)

Nominal voltage: 24 V DC (-15 %/+20 %)

Load type: inductive > 1 mH

Max. output current: ±2 A

Short-circuit current: typ. < 4 A

PWM clock frequency: 30 kHz default

Duty factor: 0…100 % (current-controlled)

Resolution: 10 bit

 Reverse voltage protection: yes

Current consumption E-bus: typ. 110 mA

Electrical isolation: 500 V (E-bus/field potential)

Current consumption power contacts: typ. 30 mA + load

Bit width in the process image: 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status

Special features: 2 digital 24 V inputs

Weight: approx. 50 g

Operating/storage temperature: 0…+55 °C/-25…+85 °C

Relative humidity: 95 %, no condensation

Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos.: IP20/see documentation

Pluggable wiring: for all ESxxxx terminals

Approvals/markings: CE, UL, ATEX, IECEx, cFMus

Ex marking: ATEX:

II 3 G Ex ec IIC T4 Gc

IECEx:

Ex ec IIC T4 Gc

cFMus:

Class I, Division 2, Groups A, B, C, D

Class I, Zone 2, AEx ec IIC T4 Gc

>>> Refer to technical document: EL2535en