Southern office: 67B Calmette, Nguyen Thai Binh Ward, District 1, HCMC
PLC Programmable Controller
HMI
Driver & servo motor
Inverter
Rotary EncoderFC7502 | SERCOS II master card, 2 channels, PCI
The SERCOS II PCI Fieldbus Cards from Beckhoff allow direct access to the
SERCON816-ASIC. The driver for these passive cards is incorporated into the TwinCAT
software and allows optimum access to the SERCOS interface. There are no artificial
limitations with regard to the number of bus devices and I/O data per device. The power
of TwinCAT comes into its own with this interface generation:
up to 254 devices (axes, I/O modules, e.g. Bus Terminals with Bus Coupler BK7500)
any assignment and length of the I/O data
exact synchronization between TwinCAT and SERCOS
cycle times from 62.5 µs are possible
synchronous communication of process data
Master mode can be parameterized by software.
It is possible to select two parallel fieldbus channels on one card (2 x SERCON816).
Synchronization of both channels and other cards along with PC is possible.
Upload of network configuration is supported.
TwinCAT I/O provides configuration tools and drivers for different Windows versions for
programs in any desired high level language (DLLs) and for Visual Basic applications
(ActiveX). Applications with OPC interfaces can access the cards via an OPC server.
Fieldbus SERCOS II
PC interface PCI
Number of fieldbus channels 2
Data transfer rates 2, 4, 8, 16 Mbaud
Bus interface 4 x connector FSMA according to IEC 874-2
Synchronization synchronization of several cards via ribbon cable
Cycle time all cycle times supported by SERCOS interface (down to 62.5 µs)
Hardware diagnostics 1 LED per channel
NOVRAM –
Dimensions approx. 95 mm x 120 mm
Operating temperature 0…+55 °C
Driver TwinCAT I/O and higher levels
>>> Refer to technical document: fc750xen
PLC Programmable Controller
HMI
Driver & servo motor
Inverter
Motor
Instrumentation – temperature control meter
Rotary Encoder
Reviews
There are no reviews yet.