KEYENCE AP-C30W pressure sensor

Product information:AP-C30W
Rated pressure range:
Negative pressure mode: 0 to -101.3 kPa
Positive pressure mode: 0 to 101.3 kPa
Mixed pressure mode: 101.3 to -101.3 kPa
Detectable liquid: Air or non-corrosive gases
Pressure type: Pressure gauge
Display: 3 1/2-digit, 2-color, 7-segment LED display (Character height: 11 mm), Display display cycle: 10 times/sec
Operation indicator: Red LED x 2 (corresponding to control output 1 and 2)
Power Consumption:
Normal
12 V: 720 mW (60 mA) or less
24 V: 960 mW (40 mA) or less
Screen resolution:
Variation: Negative pressure/Positive pressure 0.1 kPa
Mixed pressure 0.2 kPa
Temperature fluctuation for display: Maximum ±1% of pressure range
Hysteresis: Variable (Standard: 0.5% of pressure range)
Response time (vibration prevention function): Select between 2.5, 5, 100 or 500 ms
I/O:
Analog output: 1 to 5 V with 1 kΩ maximum load impedance or zero shift input selection
Zero shift input: Input time of 2 ms or more or analog output can be selected
Control output: NPN max open collector 100 mA (40 V) max residual voltage 1 V, 2 outputs (Normally open/Normally closed selectable)
Pressure port: Rc (PT) 1/8 rotates 180°
Supply voltage: 12 to 24 VDC ±10%, ripple (P-P) 10% or less
Power Consumption:
Economy mode
12 V: 480 mW (40 mA) or less
24 V: 720 mW (30 mA) or less
Environmental resistance:
Pressure resistance: 500 kPa
Ambient temperature: From 0 to +50 °C (no freezing)
Ambient humidity: From 35 to 85 % RH (no condensation)
Vibration resistance: Withstand vibration from 10 to 55 Hz, double amplitude 1.5 mm, in X, Y, Z directions for 2 hours
Materials used:
Front cover: Polysulfone plastic
Rear cover: PBT
Front seat: Polycarbonate
Pressure port: Die-cast zinc
Accessories: Power cable (2-m cable with connector)
Weight: Approx. 30 g (excluding cable) / Approx. 85 g (including 2-m cable)