KL2612 | Bus Terminal, 2-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC

The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts. The power contacts are not looped through.

Number of outputs 2 x change-over

Nominal voltage 125 V AC/30 V DC

Load type ohmic

Max. output current 2 A per channel

Switching current 0.5 A AC/2 A DC (ohmic)

Ohmic switching current 0.5 A AC/2 A DC

Inductive switching current no data

Minimum permitted load 10 µA at 10 mV

Lamp test, electronic ballast max. 2 A starting current

Electrical isolation 500 V (K-bus/field potential)

Current consumption power contacts –

Current consumption K-bus typ. 60 mA

Bit width in the process image 2 outputs

Operating cycles mech. (min.) 1 x 108

Operating cycles electr. (min.) 2 x 105 (1 A/30 V DC)

Configuration no address or configuration setting

Special features signal relay

Weight approx. 80 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings CE, UL, DNV GL

Ex marking II 3 G Ex nA IIC T4 Gc

>>> Refer to technical document: kl26xxen