BK5200 | Bộ kết nối Bus DeviceNet

BK5200 | DeviceNet Bus Coupler

Contact

BRAND: BECKHOFF

CODE: BK5200

CATEGORY: BUS TERMINALS

SUPPLIER: SUNLY

Description
Reviews (0)

The BK5200 Bus Coupler connects the DeviceNet bus system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of one Bus Coupler, any number of up to 64 terminals and one end terminal.

The Bus Coupler operates on the basis of the CAN protocol. The DeviceNet standard on which the Bus Coupler is based allows the operation of diverse DeviceNet devices in one network. DeviceNet is based on a definition of communication objects for the exchange of data from the sensor/actuator area that is especially oriented to automation technology.

The Bus Coupler and Bus Terminals can be parameterized on a PC using the KS2000 configuration set. Commissioning is also possible without the KS2000. Corresponding EDS data files are available for DeviceNet configuration tools.

BK5200 | Bộ kết nối Bus DeviceNet

Number of Bus Terminals 64

Max. number of bytes fieldbus 512 byte input and 512 byte output

Digital peripheral signals 512 inputs/outputs

Analog peripheral signals 256 inputs/outputs

Configuration possibility via KS2000 or the controller

Data transfer rates via Dip switch

Bus interface 1 x open pluggable connector, 5-pin, included

Data transfer medium screened, twisted copper wire with power supply, 5-pin

Power supply 24 V DC (-15 %/+20 %), through bus cable 11…25 V (conforms to DeviceNet specification)

Input current 70 mA + (total K-bus current)/4, 500 mA max.

Starting current approx. 2.5 x continuous current

Recommended fuse ≤ 10 A

Current supply K-bus 1750 mA

Power contacts max. 24 V DC/max. 10 A

Electrical isolation 500 V (power contact/supply voltage Bus Coupler)

Operating modes bit strobe, polling, cyclic, change of state (COS)

DeviceNet type communications adapter

Weight approx. 150 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Approvals/markings CE, UL, ATEX, IECEx

Ex marking ATEX: II 3 G Ex ec IIC T4 Gc

IECEx: Ex ec IIC T4 Gc

>>> Refer to technical document:

Loading...

Reviews

There are no reviews yet.

Be the first to review “BK5200 | DeviceNet Bus Coupler” Cancel reply

@!-/#Chào mỪng1

@!-/#Chào mỪng1