Southern office: 67B Calmette, Nguyen Thai Binh Ward, District 1, HCMC
PLC Programmable Controller
HMI
Driver & servo motor
Inverter
Rotary EncoderThe EL2008 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting diodes.
Special features:
- Connection of different load types possible (ohmic, inductive, lamp load)
- Max. output current 0.5 A per channel
- Short-circuit-proof outputs and reverse polarity protection
Connection technology 1-wire
Number of outputs 8
Nominal voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks –
Max. output current 0.5 A (short-circuit proof) per channel
Short-circuit current typ. < 2 A
Reverse voltage protection yes
Breaking energy < 150 mJ/channel
Switching times typ. TON: 60 µs, typ. TOFF: 300 µs
Current consumption E-bus typ. 110 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 15 mA + load
Bit width in the process image 8 outputs
Configuration no address or configuration setting
Weight approx. 55 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Pluggable wiring for all ESxxxx terminals
Approvals/markings CE, UL, ATEX, DNV GL, IECEx, cFMus
Ex marking ATEX:
II 3 G Ex nA IIC T4 Gc
IECEx:
Ex nA IIC T4 Gc
Ex tc IIIC T135 °C Dc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc
>>> Refer to technical document: EL2008
PLC Programmable Controller
HMI
Driver & servo motor
Inverter
Motor
Instrumentation – temperature control meter
Rotary Encoder
Reviews
There are no reviews yet.