KEYENCE GL-R24H 24-axis, hand-protection safety optical shield

Product information:
Product code: GL-R24H
Detection capacity: Lens diameter ø25 mm
Total length: 480 mm
Number of beam shafts: 24
Detection height: 460 mm
Protection height: 505 mm
Spot axis distance/Lens diameter: 20 mm / ø5
Detection distance: 0.2 to 15 m
Effective aperture angle: Maximum ±2.5° (When operating distance is 3 m or more)
Light source: Infrared LED (870 nm)
Response time (ms): Optical synchronization (Channel 0) or Wire synchronization: ON→OFF 7, OFF→ON 49.3; Optical synchronization (Channel A or B): ON→OFF 9.5, OFF→ON 53
Detection mode: Turns on when there is no interruption in the detection area
Synchronization between transmitter and receiver: Optical synchronization or Wire synchronization (determined by wire)
Anti-light interference function: Prevents mutual interference in up to two GL-R systems.
Control output (OSSD Output): 2 transistor outputs, maximum load current 500 mA
Power supply: Power supply voltage 24 VDC ±20%, ripple (PP) of 10% or less, Class 2
Safety standards: Reverse current protection, short circuit protection for each output, surge protection for each output (various safety standards)
Environmental resistance: Water and dust resistant IP65/IP67, ambient temperature from -10 to +55 °C
Storage temperature: -25 to +60 °C
Relative humidity: 15 to 85 % RH (Non-condensing)