KL2641 | Bus Terminal, 1-channel relay output, 230 V AC, 16 A, manual operation

The KL2641 output terminal has a relay with a single contact which can be used universally for switching devices requiring mains power. The relay can optionally be switched in manual or automatic mode. The switch for the manual operation always indicates the switch status of the relay. The operating mode can be set via a manual/automatic switch, is displayed via an LED and transferred to the process image as a status bit. In manual mode, the coil control is interrupted and the relay is operated via the manual switch. The manual operation can also be used without 24 V supply for switching the actuator. In automatic mode, the relay is operated via the controller.

Number of outputs 1 x make contact

Nominal voltage 230 V AC (max. switching voltage 440 V AC)

Switching capacity max. 5 kVA

Switching voltage max. 440 V AC (UL: max. 230 V AC)

Load type ohmic, inductive, lamp load

Max. output current 16 A

Switching current 16 A AC

Switching current max. 16 A AC

Minimum permitted load –

Lamp test, electronic ballast max. 16 A starting current

Current consumption power contacts typ. 65 mA + load

Current consumption K-bus typ. 5 mA

Contact material AgSnO2

Bit width in the process image 2 inputs (status manual, automatic), 2 outputs

Operating cycles 106

Operating cycles mech. (min.) 1 x 106

Operating cycles electr. (min.) no data

Configuration no address or configuration setting

Special features manual operation; bistable relay contact

Weight approx. 110 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Approvals/markings CE

>>> Refer to technical document: kl26xxen