KL9195 | Shield terminal

KL9195 | Shield terminal

The KL9195 Bus Terminal allows the supply voltage to be accessed a number of times via spring force terminals. It makes it unnecessary to use additional terminal blocks on the terminal strip. The KL9195 can be used for the connection of screens. The KL9195 connects the spring force contacts directly to the DIN rail, and can optimally ground incoming electromagnetic radiation. The two power contacts are looped through by the KL9195, allowing two wires to be connected to each power contact. 

Current load ≤ 10 A

Integrated fine-wire fuse –

Power LED –

Defect LED –

Diagnostics –

Current consumption K-bus –

Nominal voltage arbitrary up to 230 V AC

Electrical isolation –

Reported to K-bus –

PE contact –

Shield connection 2 x

Renewed infeed –

Connection facility to additional power contact 2

K-bus, looped through yes

Bit width in the process image 0

Electrical connection to DIN rail yes

Housing width 12 mm

Weight approx. 50 g

Side by side mounting on Bus Terminals with power contact only 2 power contacts

Side by side mounting on Bus Terminals without power contact –

Operating/storage temperature 0…+55 °C/-25…+85 °C

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings CE, UL, ATEX, IECEx, DNV GL

Ex marking ATEX:

II 3 G Ex nA IIC T4 Gc

IECEx:

Ex ec IIC T4 Gc

>>> Refer to technical document: dnv_gl_notes_for_bus_terminals_en