BK5220 | DeviceNet Bus Coupler

The BK5220 Economy plus Bus Coupler connects the DeviceNet bus system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of one Bus Coupler, any number of up to 64 terminals and one end terminal. With the K-bus extension technology, the BK5220 allows the connection of up to 255 spatially distributed Bus Terminals to one Bus Coupler. The Economy plus series supports all Beckhoff system Bus Terminals and it can process in its full configuration 1020 digital signals and a maximum of 256 analog input and output channels per slave.

The Bus Coupler operates on the basis of the CAN protocol. The DeviceNet standard on which the Bus Coupler is based allows the operation of diverse DeviceNet devices in one network. DeviceNet is based on a definition of communication objects for the exchange of data from the sensor/actuator area that is especially oriented to automation technology.

The Bus Coupler and Bus Terminals can be parameterized on a PC using the KS2000 configuration set. Commissioning is also possible without the KS2000. Corresponding EDS data files are available for DeviceNet configuration tools.

Number of Bus Terminals 64 (255 with K-bus extension)

Max. number of bytes fieldbus 512 byte input and 512 byte output

Digital peripheral signals 1,020 inputs/outputs

Analog peripheral signals 256 inputs/outputs

Configuration possibility via KS2000 or the controller

Data transfer rates automatic detection

Bus interface 1 x open pluggable connector, 5-pin, included

Data transfer medium screened, twisted copper wire with power supply, 5-pin

Power supply 24 V DC (-15 %/+20 %), through bus cable 11…25 V (conforms to DeviceNet specification)

Input current 70 mA + (total K-bus current)/4, 500 mA max.

Starting current approx. 2.5 x continuous current

Recommended fuse ≤ 10 A

Current supply K-bus 1750 mA

Power contacts max. 24 V DC/max. 10 A

Electrical isolation 500 V (power contact/supply voltage Bus Coupler)

Operating modes bit strobe, polling, cyclic, change of state (COS)

DeviceNet type communications adapter

Weight approx. 130 g

Operating/storage temperature -25…+60 °C/-40…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Approvals/markings CE, UL, ATEX, IECEx, DNV GL

Ex marking ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc

>>> Refer to technical document: