Body protection type safety optical shield, 16 optical axes KEYENCE GL-R16L

Product information:
Product code: GL-R16L
Detection capacity: Maximum diameter 45 mm
Total length: 640 mm
Number of beam shafts: 16
Detection height: 600 mm
Protection height: 685 mm
Beam axis distance/lens diameter: 40 mm / lens diameter 5 mm
Detection distance: From 0.2 to 15 m
Effective aperture angle: Maximum ±2.5° (When operating distance is 3 m or more)
Light source: Infrared LED (870 nm)
Detection mode: Turns on when there is no interruption in the detection area
Light interference prevention function: Prevents mutual interference with up to two GL-R systems
Control output: 2 transistor outputs (PNP or NPN), Maximum load current 500 mA
Power supply: 24 VDC ±20%, ripple 10% or less, Class 2
Safety certifications: EMC, EMS, EMI, IEC61496-1, EN61496-1, UL61496-1, IEC61496-2, EN61496-2, UL61496-2, IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3), EN ISO13849-1:2015 (Category 4, PLe), UL508, UL1998
Environmental resistance: IP65/IP67 (IEC60529), Overpressure category II, Ambient temperature -10 to +55 °C, Relative humidity 15 to 85% RH
Vibration resistance: 10 to 55 Hz, 0.7 mm Dual amplitude, 20 scans in X, Y and Z directions
Shock resistance: 100 m/s² (Approx. 10 G), 16 ms pulse, 3 times in X, Y and Z directions
Materials: Main main unit housing: Aluminum, Upper/lower housing: Nylon (GF 30%), Front housing: Polycarbonate, SUS304
Mass of transmitter: 880 g, Receiver: 890 g

User
Sample

GL-R18L

Detection ability

ø45 mm

total length

720mm

Beam axis number

18

Detection height

680mm

Protection height

765mm

Beam axis distance/lens diameter

40mm/ø5

Detection distance

0.2 to 15 m*1

Effective aperture angle

Maximum ±2.5° (When operating distance is 3 m or more)

Light source

Infrared LED (870 nm)

Response time

Optical Synchronization (Channel 0) or Wire Synchronization

ON→OFF

6.6

OFF→ON

48.7*2

All suffered
lock→ON

63.1*3

Optical synchronization (Channel A or B)

ON→OFF

8.4

OFF→ON

51.4*2

All suffered
lock→ON

70.5*3

Detection mode

Turns on when there is no interruption in the detection area

Synchronization method

Optical Synchronization or Wire Synchronization (determined by wire)

Light interference prevention function

Prevent mutual interference with up to two GL-R systems.
Optical synchronization: separated by Channels A and B with setting switch
Conductor synchronization: automatic compartment

Control output (OSSD output)

Way out

2 transistor outputs. (PNP or NPN is determined by cable type)

Maximum load current

500 mA*4

Residual voltage (during ON)

2.5 V maximum (with cable length of 5 m)

OFF state voltage

2.0 V maximum (with cable length of 5 m)

Leakage current

Maximum 200 µA

Maximum capacitive load

2.2 µF

Wiring load impedance

2.5 Ω maximum

Auxiliary output (Lane
safe)

AUX

Transistor output. (Compatible with both PNP and NPN)
Load current: 50 mA max, Residual voltage: 2.5 V max (with cable length of 5 m)

Error output

Secondary input

When using PNP output cable

EDM input
Waiting entrance
Reset input
Mute input 1, 2
Control input

ON voltage: 10 to 30 V / OFF voltage: Open or 0 to 3 V
Short circuit current: Approx. 2.5 mA
(Approx. 10 mA with EDM input only)

When using NPN output cable

ON voltage: 0 to 3 V / OFF voltage: Open or 10 V or more
Up to mains voltage
Short circuit current: Approx. 2.5 mA
(Approx. 10 mA with EDM input only)

Power supply

Power voltage

24 VDC ±20%, ripple (P-P) 10% or less, Class 2

Current Consumption (Peak) (mA)

Player

52*5*6

Receiving head

73*5*6

Protection circuit

Reverse current protection, short circuit protection for each output, surge protection for each output

Standard allowed

YOU C

EMS

IEC61496-1, EN61496-1, UL61496-1

EMI

EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA

Safe

IEC61496-1, EN61496-1, UL61496-1 (ESPE Type 4)
IEC61496-2, EN61496-2, UL61496-2 (AOPD Type 4)
IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3)
EN ISO13849-1:2015 (Category 4, PLe)
UL508
UL1998

Environmental resistance

Weather resistance rating for the enclosure

IP65/IP67 (IEC60529)

Overvoltage type

II

Ambient light

Bulb light: 3,000 lux or less, Sunlight: 20,000 lux or less

Ambient temperature

-10 to +55 °C (No freezing)

Storage temperature

-25 to +60 °C (No freezing)

Relative humidity

15 to 85 % RH (No condensation)

Relative storage humidity

15 to 95 % RH

Vibration resistant

10 to 55 Hz, 0.7 mm Dual amplitude, 20 scans in X, Y, and Z directions

Resistant to impact

100 m/s2 (Approx. 10 G), 16 ms clock, 3 times in X, Y, and Z directions

Material

Main main unit housing

Aluminum

Upper shell/lower shell

Nylon (GF 30%)

Front cover

Polycarbonate, SUS304

Mass

Player

1000 g
ChatGPT
Below is the main information about product model GL-R18L:

Product code: GL-R18L
Detection capacity: Maximum diameter 45 mm
Total length: 720 mm
Number of beam shafts: 18
Detection height: 680 mm
Protection height: 765 mm
Beam axis distance/lens diameter: 40 mm / lens diameter 5 mm
Detection distance: From 0.2 to 15 m
Effective aperture angle: Maximum ±2.5° (When operating distance is 3 m or more)
Light source: Infrared LED (870 nm)
Detection mode: Turns on when there is no interruption in the detection area
Light interference prevention function: Prevents mutual interference with up to two GL-R systems
Control output: 2 transistor outputs (PNP or NPN), Maximum load current 500 mA
Power supply: 24 VDC ±20%, ripple 10% or less, Class 2
Safety certifications: EMC, EMS, EMI, IEC61496-1, EN61496-1, UL61496-1, IEC61496-2, EN61496-2, UL61496-2, IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3), EN ISO13849-1:2015 (Category 4, PLe), UL508, UL1998
Environmental resistance: IP65/IP67 (IEC60529), Overpressure category II, Ambient temperature -10 to +55 °C, Relative humidity 15 to 85% RH
Vibration resistance: 10 to 55 Hz, 0.7 mm Dual amplitude, 20 scans in X, Y and Z directions
Shock resistance: 100 m/s² (Approx. 10 G), 16 ms pulse, 3 times in X, Y and Z directions
Materials: Main main unit housing: Aluminum, Upper/lower housing: Nylon (GF 30%), Front housing: Polycarbonate, SUS304
Mass of transmitter: 1000 g