KL2631 | Bus Terminal, 1-channel relay output, 400 V AC, 300 V DC, 2 A

The KL2631 output terminal has a relay which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 400 V AC, and can be generally used for switching devices requiring mains power. The Bus Terminal indicates its signal state by means of a light emitting diode. In order to use the high voltage of up to 400 V AC, the KL2631 must be supplied via the KL9190 power feed terminal.

Number of outputs 1 x make contacts for power contact

Nominal voltage 400 V AC/300 V DC

Switching capacity DC 300 V = 0.15 A; 24 V = 5 A; non-linear

Switching capacity AC 1500 VA

Switching voltage minimum power contact

Load type ohmic, inductive, lamp load

Max. output current 2 A

Switching current switching capacity DC: 300 V = 0.15 A; 24 V = 5 A; non-linear;

switching capacity AC: 1500 VA

Minimum permitted load no data

Lamp test, electronic ballast no data

Electrical isolation 500 V (K-bus/field potential)

Current consumption power contacts load only

Current consumption K-bus typ. 80 mA

Bit width in the process image 2 outputs

Operating cycles mech. (min.) 1 x 107

Operating cycles electr. (min.) 1.3 x 105 (2 A/250 V AC)

Configuration no address or configuration setting

Special features 400 V contact

Weight approx. 85 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings CE, DNV GL

>>> Refer to technical document: kl2631en