KL2702 | Bus Terminal, 2-channel solid-state relay output, 0…230 V AC/DC, 0.3 A

The KL2702-xxxx output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The terminal has two outputs that indicate their signal state via LEDs.

Special features:

2 x make contact

max. output current

0.3 A (KL2702)

2 A (KL2702-0002)

1.5 A (KL2702-0020)

mutually locked outputs (KL2702-0002)

Connection technology 2-/3-/4-wire

Number of outputs 2 x make contacts

Nominal voltage 0…230 V AC/DC (DC…100 Hz)

Load type ohmic, inductive

Max. output current 0.3 A steady load per channel

Rotating field frequence DC…100 Hz

Surge voltage protection from 400 V AC

Peak current 0.5 A (20 s), 1.5 A (100 ms)

Contact resistance 2.1 Ω typ., 3.2 Ω max.

Switch-on time 4…6 ms

Switch-off time 0.05…0.1 ms

Switch-on delay 320 µs

Switch-off delay 6.2 ms

Electrical isolation 500 V (K-bus/field voltage), 2500 V AC (1 min.)

Leakage current (OFF state) << 1 mA

Current consumption power contacts only leakage and load current

Current consumption K-bus typ. 10 mA

Bit width in the process image 2 outputs

Configuration no address or configuration setting

Weight approx. 55 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings

CE, UL, ATEX, IECEx, DNV GL

Ex marking

ATEX:

II 3 G Ex ec IIC T4 Gc

IECEx:

Ex ec IIC T4 Gc

>>> Refer to technical document: KL2701_KL27x2en