KL2732 | Bus Terminal, 2-channel triac output, 12…230 V AC, 1 A, without power contacts

KL2732 | Bus Terminal, 2-channel triac output, 12…230 V AC, 1 A, without power contacts

The KL2732 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a triac. As a semiconductor switch, it is not subject to wear. The KL2732 has two mutually locked outputs and operates with two potential-free switches. The terminal is most suitable for reverse motors.

Connection technology 2-wire

Number of outputs 2 x make contacts (without power contacts), mutually locked

Nominal voltage 12…230 V AC

Load type ohmic, inductive

Max. output current 1 A (leakage current: typ. 0.8 mA, max. 1.5 mA) per channel

Rotating field frequency 47…63 Hz

Surge voltage protection > 275 V AC

Peak current 40 A (16 ms), 3 A (30 s)

Switch-off time T/2

Residual voltage max. 1.5 V

Electrical isolation 500 V (K-bus/field voltage), 3750 V AC (1 min.)

Leakage current (OFF state) typ. 0.8 mA, max. 1.5 mA

Current consumption power contacts – (no power contacts)

Current consumption K-bus typ. 10 mA

Bit width in the process image 2 outputs

Configuration no address or configuration setting

Special features reverse motors (blinds)

Weight approx. 55 g

Operating/storage temperature 0…+55 °C/-25…+85 °C

Relative humidity 95 %, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Pluggable wiring for all KSxxxx Bus Terminals

Approvals/markings CE, DNV GL

>>> Refer to technical document: KL2701_KL27x2en