EL2084 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, ground switching

The EL2084 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal contains four channels whose signal state is indicated by LEDs.

Special features:

• ground switching
• Connection of different load types possible (ohmic, inductive, lamp load)
• Max. output current 0.5 A per channel
• Overload and short-circuit proof outputs and reverse polarity protection

Connection technology: 2-wire

Number of outputs: 4

Nominal voltage: 24 V DC (-15 %/+20 %)

Load type: ohmic, inductive, lamp load

Distributed clocks: –

Max. output current: 0.5 A (short-circuit proof) per channel

Short-circuit current: typ. < 7 A

Reverse voltage protection: yes

Breaking energy: < 100 mJ/channel

Switching times: typ. TON: 50 µs, typ. TOFF: 200 µs

Current consumption E-bus: typ. 100 mA

Electrical isolation: 500V (E-bus/field potential)

Current consumption power contacts: typ. 30 mA + load

Bit width in the process image: 4 outputs

Configuration : no address or configuration setting

Weight: approx. 70 g

Operating/storage temperature: 0…+55 °C/-25…+85 °C

Relative humidity: 95 %, no condensation

Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos.: IP20/variable

Pluggable wiring: for all ESxxxx terminals

Approvals/markings: CE, UL, ATEX, IECEx

Ex marking ATEX:

II 3 G Ex ec IIC T4 Gc

IECEx:

Ex ec IIC T4 Gc

>>> Refer to technical document: el2084