KL5121 | Bus Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 250 kHz, with 4 x digital output 24 V DC, linear path control
The KL5121 Bus Terminal can be used to implement a linear path control. The terminal reads an incremental signal, which can be supplied by an incremental encoder or a pulse generator, and switches the outputs when the counter reaches a previously defined state. The counter states can be transmitted to the terminal by the higher-level automation device in the form of a table. The position is acquired with the aid of the latch input, which is activated/deactivated by the gate input. Up to four 24 V outputs can be switched. The LEDs indicate the states of the signals at the various inputs and outputs.
Technology incremental encoder interface with programmable outputs
Number of channels 1 incremental encoder + 4 outputs
Encoder connection A, B, latch, gate
Encoder operating voltage 24 V DC
Counter 16 bit, binary
Limit frequency 1 million increments/s (with 4-fold evaluation)
Output voltage 24 V
Output current 0.5 A
Switching times < 100 µs
Power supply 24 V DC (-15 %/+20 %)
Current consumption power contacts typ. 30 mA + load
Current consumption K-bus typ. 60 mA
Bit width in the process image input/output: 2 x 16 bit data, 2 x 8 bit control/status
Special features electronic camshaft controller
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings CE, UL, ATEX, IECEx
Ex marking ATEX:
II 3 G Ex nA IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
>>> Refer to technical document: kl5121en
Reviews
There are no reviews yet.